با عرض سلام به دوستان گرامی
برای پروژه دانشگاهیم یه برنامه دارم که به زبان C نوشته شده ولی چون باید ارایه بدم باید زبان Basic رو داشته باشم و باید تا آخر فروردین تحویل بدم برای همین اگر کسی میتونه این کارو واسم انجام بده ممنون میشم
خیلی بهش نیاز دارم :angry:
برنامه رو قرار میدم اگه درهم شد آدرس پلود شده رو هم قرار میدم
http://www.4shared.com/zip/O7ePUAxy/file.html
/************************************************** ***
This program was produced by the
CodeWizardAVR V2.05.0 Advanced
Automatic Program Generator
© Copyright 1998-2010 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Project :
Version :
Date : 10/20/2011
Author : www.Eca.ir *** www.Webkade.ir
Company :
Comments:
Chip type : ATmega8
Program type : Application
AVR Core Clock frequency: 1.000000 MHz
Memory model : Small
External RAM size : 0
Data Stack size : 256
************************************************** ***/
#include <mega8.h>
#include <delay.h>
#include <stdio.h>
// Alphanumeric LCD Module functions
#include <alcd.h>
long int timer0_ov;
long int in_freq;
char buff[16],buff2[16];
int humidity;
// Timer 0 overflow interrupt service routine
interrupt [TIM0_OVF] void timer0_ovf_isr(void)
{
timer0_ov++;
}
// Declare your global variables here
void main(void)
{
// Declare your local variables here
// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port C initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;
// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;
// Timer/Counter 0 initialization
// Clock source: T0 pin Falling Edge
TCCR0=0x06;
TCNT0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;
// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
MCUCR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x01;
// USART initialization
// USART disabled
UCSRB=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;
// ADC initialization
// ADC disabled
ADCSRA=0x00;
// SPI initialization
// SPI disabled
SPCR=0x00;
// TWI initialization
// TWI disabled
TWCR=0x00;
// Alphanumeric LCD initialization
// Connections specified in the
// Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu:
// RS - PORTB Bit 0
// RD - PORTB Bit 1
// EN - PORTB Bit 2
// D4 - PORTB Bit 4
// D5 - PORTB Bit 5
// D6 - PORTB Bit 6
// D7 - PORTB Bit 7
// Characters/line: 16
lcd_init(16);
// Global enable interrupts
#asm("sei"
while (1)
{
TCCR0=0x06;
#asm("sei"
delay_ms(50);
#asm("cli"
in_freq=20*(timer0_ov*256+TCNT0);
sprintf(buff,"Freq=%d",in_freq);
//delay_ms(250);
lcd_clear();
lcd_puts(buff);
TCCR0=0x00;
timer0_ov=0;
TCNT0=0;
humidity=(-0.075872)*(in_freq-7351);
lcd_gotoxy(0,1);
sprintf(buff2,"Humidity=%d",humidity);
lcd_puts(buff2);
}
}
برای پروژه دانشگاهیم یه برنامه دارم که به زبان C نوشته شده ولی چون باید ارایه بدم باید زبان Basic رو داشته باشم و باید تا آخر فروردین تحویل بدم برای همین اگر کسی میتونه این کارو واسم انجام بده ممنون میشم
خیلی بهش نیاز دارم :angry:
برنامه رو قرار میدم اگه درهم شد آدرس پلود شده رو هم قرار میدم
http://www.4shared.com/zip/O7ePUAxy/file.html
/************************************************** ***
This program was produced by the
CodeWizardAVR V2.05.0 Advanced
Automatic Program Generator
© Copyright 1998-2010 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Project :
Version :
Date : 10/20/2011
Author : www.Eca.ir *** www.Webkade.ir
Company :
Comments:
Chip type : ATmega8
Program type : Application
AVR Core Clock frequency: 1.000000 MHz
Memory model : Small
External RAM size : 0
Data Stack size : 256
************************************************** ***/
#include <mega8.h>
#include <delay.h>
#include <stdio.h>
// Alphanumeric LCD Module functions
#include <alcd.h>
long int timer0_ov;
long int in_freq;
char buff[16],buff2[16];
int humidity;
// Timer 0 overflow interrupt service routine
interrupt [TIM0_OVF] void timer0_ovf_isr(void)
{
timer0_ov++;
}
// Declare your global variables here
void main(void)
{
// Declare your local variables here
// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port C initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;
// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;
// Timer/Counter 0 initialization
// Clock source: T0 pin Falling Edge
TCCR0=0x06;
TCNT0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;
// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
MCUCR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x01;
// USART initialization
// USART disabled
UCSRB=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;
// ADC initialization
// ADC disabled
ADCSRA=0x00;
// SPI initialization
// SPI disabled
SPCR=0x00;
// TWI initialization
// TWI disabled
TWCR=0x00;
// Alphanumeric LCD initialization
// Connections specified in the
// Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu:
// RS - PORTB Bit 0
// RD - PORTB Bit 1
// EN - PORTB Bit 2
// D4 - PORTB Bit 4
// D5 - PORTB Bit 5
// D6 - PORTB Bit 6
// D7 - PORTB Bit 7
// Characters/line: 16
lcd_init(16);
// Global enable interrupts
#asm("sei"
while (1)
{
TCCR0=0x06;
#asm("sei"
delay_ms(50);
#asm("cli"
in_freq=20*(timer0_ov*256+TCNT0);
sprintf(buff,"Freq=%d",in_freq);
//delay_ms(250);
lcd_clear();
lcd_puts(buff);
TCCR0=0x00;
timer0_ov=0;
TCNT0=0;
humidity=(-0.075872)*(in_freq-7351);
lcd_gotoxy(0,1);
sprintf(buff2,"Humidity=%d",humidity);
lcd_puts(buff2);
}
}
دیدگاه