مشکل در ارتباط با حافظه Flash در Spartan3-AN

[m_farahaniasl]

سلام خدمت دوستان
مشکل از این قرار هست که در برد ارتباط با فلش M29DW323DT مشکلی وجود دارد. تماما موارد نسبت به داکیومنت های شرکت Xilinxرعایت شده نقشه و فایل ucf هم با داکیومنت مطابقت میکنه اما موقع خواندن و نوشتن در حافظه فقط مقدار 0xFFFEFFFF برگشت داده میشود!!





فایل ucf:

[FONT=Yekan]NET "NOR_FLASH_Mem_A_pin<10>" [/FONT][FONT=Yekan]            [/FONT][FONT=Yekan]LOC= "F16" | IOSTANDARD= LVCMOS33;#A21[/FONT]    NET "NOR_FLASH_Mem_A_pin<11>"             LOC= "G16" | IOSTANDARD= LVCMOS33;#A20
    NET "NOR_FLASH_Mem_A_pin<12>"             LOC= "F18" | IOSTANDARD= LVCMOS33;#A19
    NET "NOR_FLASH_Mem_A_pin<13>"             LOC= "G17" | IOSTANDARD= LVCMOS33;#A18
    NET "NOR_FLASH_Mem_A_pin<14>"             LOC= "F19" | IOSTANDARD= LVCMOS33;#A17
    NET "NOR_FLASH_Mem_A_pin<15>"             LOC= "F20" | IOSTANDARD= LVCMOS33;#A16
    NET "NOR_FLASH_Mem_A_pin<16>"             LOC= "G20" | IOSTANDARD= LVCMOS33;#A15
    NET "NOR_FLASH_Mem_A_pin<17>"             LOC= "H20" | IOSTANDARD= LVCMOS33;#A14
    NET "NOR_FLASH_Mem_A_pin<18>"             LOC= "H18" | IOSTANDARD= LVCMOS33;#A13
    NET "NOR_FLASH_Mem_A_pin<19>"             LOC= "H19" | IOSTANDARD= LVCMOS33;#A12
    NET "NOR_FLASH_Mem_A_pin<20>"             LOC= "J18" | IOSTANDARD= LVCMOS33;#A11
    NET "NOR_FLASH_Mem_A_pin<21>"             LOC= "J19" | IOSTANDARD= LVCMOS33;#A10
    NET "NOR_FLASH_Mem_A_pin<22>"              LOC= "L16" | IOSTANDARD= LVCMOS33;#A9
    NET "NOR_FLASH_Mem_A_pin<23>"              LOC= "L15" | IOSTANDARD= LVCMOS33;#A8
    NET "NOR_FLASH_Mem_A_pin<24>"              LOC= "M18" | IOSTANDARD= LVCMOS33;#A7
    NET "NOR_FLASH_Mem_A_pin<25>"              LOC= "M17" | IOSTANDARD= LVCMOS33;#A6
    NET "NOR_FLASH_Mem_A_pin<26>"              LOC= "N19" | IOSTANDARD= LVCMOS33;#A5
    NET "NOR_FLASH_Mem_A_pin<27>"              LOC= "N18" | IOSTANDARD= LVCMOS33;#A4
    NET "NOR_FLASH_Mem_A_pin<28>"              LOC= "N17" | IOSTANDARD= LVCMOS33;#A3
    NET "NOR_FLASH_Mem_A_pin<29>"              LOC= "N15" | IOSTANDARD= LVCMOS33;#A2
    NET "NOR_FLASH_Mem_A_pin<30>"              LOC= "R16" | IOSTANDARD= LVCMOS33;#A1

    #Data
    NET "NOR_FLASH_Mem_DQ_pin<0>"             LOC= "T17"| IOSTANDARD= LVCMOS33; #A0
    NET "NOR_FLASH_Mem_DQ_pin<1>"             LOC= "Y7" | IOSTANDARD= LVCMOS33; #D14
    NET "NOR_FLASH_Mem_DQ_pin<2>"             LOC= "V8" | IOSTANDARD= LVCMOS33; #D13
    NET "NOR_FLASH_Mem_DQ_pin<3>"             LOC= "V9" | IOSTANDARD= LVCMOS33; #D12
    NET "NOR_FLASH_Mem_DQ_pin<4>"             LOC= "Y12"| IOSTANDARD= LVCMOS33; #D11
    NET "NOR_FLASH_Mem_DQ_pin<5>"             LOC= "V14"| IOSTANDARD= LVCMOS33; #D10
    NET "NOR_FLASH_Mem_DQ_pin<6>"             LOC= "Y16"| IOSTANDARD= LVCMOS33; #D9
    NET "NOR_FLASH_Mem_DQ_pin<7>"             LOC= "W16"| IOSTANDARD= LVCMOS33; #D8
    NET "NOR_FLASH_Mem_DQ_pin<8>"             LOC= "V7" | IOSTANDARD= LVCMOS33; #D7
    NET "NOR_FLASH_Mem_DQ_pin<9>"             LOC= "W8" | IOSTANDARD= LVCMOS33; #D6
    NET "NOR_FLASH_Mem_DQ_pin<10>"             LOC= "U10"| IOSTANDARD= LVCMOS33; #D5
    NET "NOR_FLASH_Mem_DQ_pin<11>"             LOC= "T10"| IOSTANDARD= LVCMOS33; #D4
    NET "NOR_FLASH_Mem_DQ_pin<12>"             LOC= "W14"| IOSTANDARD= LVCMOS33; #D3
    NET "NOR_FLASH_Mem_DQ_pin<13>"             LOC= "Y15"| IOSTANDARD= LVCMOS33; #D2
    NET "NOR_FLASH_Mem_DQ_pin<14>"             LOC= "V15"| IOSTANDARD= LVCMOS33; #D1
    NET "NOR_FLASH_Mem_DQ_pin<15>"             LOC= "W18"| IOSTANDARD= LVCMOS33; #miso
    #NET "NOR_FLASH_Mem_DQ_pin<15>" --> use NF_A<0> on pin T17 when NF_BYTE = High

    #control
    NET "NOR_FLASH_Mem_CEN_pin"                 LOC= "U18"| IOSTANDARD= LVCMOS33;
    NET "NOR_FLASH_Mem_OEN_pin"                  LOC= "V19"| IOSTANDARD= LVCMOS33;
    NET "NOR_FLASH_Mem_WEN_pin"                  LOC= "W20"| IOSTANDARD= LVCMOS33;
    NET "NOR_FLASH_Mem_BEN_pin"                 LOC= "V20"| IOSTANDARD= LVCMOS33;
    NET "NOR_FLASH_Mem_RPN_pin"                  LOC= "J20"| IOSTANDARD= LVCMOS33;
[FONT=Yekan]    [/FONT][FONT=Yekan]NET "NOR_FLASH_Mem_WP_pin"  [/FONT][FONT=Yekan]                [/FONT][FONT=Yekan]LOC= "K18"| IOSTANDARD= LVCMOS33;[/FONT]

فایل mhs:

[FONT=Yekan] PORT NOR_FLASH_Mem_A_pin = NOR_FLASH_Mem_A_pin_vslice_10_30_concat, DIR = O, VEC = [10:30][/FONT] PORT NOR_FLASH_Mem_DQ_pin = NOR_FLASH_Mem_DQ, DIR = IO, VEC = [0:15]
 PORT NOR_FLASH_Mem_CEN_pin = NOR_FLASH_Mem_CEN, DIR = O
 PORT NOR_FLASH_Mem_OEN_pin = NOR_FLASH_Mem_OEN, DIR = O
 PORT NOR_FLASH_Mem_WEN_pin = NOR_FLASH_Mem_WEN, DIR = O
 PORT NOR_FLASH_Mem_WP_pin = net_vcc, DIR = O
 PORT NOR_FLASH_Mem_BEN_pin = net_vcc, DIR = O
[FONT=Yekan] PORT NOR_FLASH_Mem_RPN_pin = net_vcc, DIR = O[/FONT]