میشه راهنمایی کنید سیم پیچ های اولیه و ثانویه چند دوره؟


کد:
Primary Winding Start on pin(s) 2 and wind 99 turns (x 1 filar) of item [5]. in 2 layer(s) from left to right. At the end of 1st layer, continue to wind the next layer from right to left. On the final layer, spread the winding evenly across entire bobbin. Finish this winding on pin(s) 1. Add 3 layers of tape, item [3], for insulation. Secondary Winding Start on pin(s) 6 and wind 4 turns (x 1 filar) of item [6]. Spread the winding evenly across entire bobbin. Wind in same rotational direction as primary winding. Finish this winding on pin(s) 7. Add 1 layer of tape, item [3], for insulation. Start on pin(s) 8 and wind 5 turns (x 1 filar) of item [7]. Spread the winding evenly across entire bobbin. Wind in same rotational direction as primary winding. Finish this winding on pin(s) 6. Add 1 layer of tape, item [3], for insulation. Start on pin(s) 7 and wind 4 turns (x 1 filar) of item [8]. Spread the winding evenly across entire bobbin. Finish this winding on pin(s) 9. Add 2 layers of tape, item [3], for insulation. Core Assembly Assemble and secure core halves. Item [1]. Varnish Dip varnish uniformly in item [4]. Do not vacuum impregnate.
دیدگاه