یعنی چی؟UART_Init((LPC_UART_TypeDef *)LPC_UART0, &UARTConfigStruct);
typedef struct
{
union {
__I uint8_t RBR;
__O uint8_t THR;
__IO uint8_t DLL;
uint32_t RESERVED0;
};
union {
__IO uint8_t DLM;
__IO uint32_t IER;
};
union {
__I uint32_t IIR;
__O uint8_t FCR;
};
__IO uint8_t LCR;
uint8_t RESERVED1[7];
__I uint8_t LSR;
uint8_t RESERVED2[7];
__IO uint8_t SCR;
uint8_t RESERVED3[3];
__IO uint32_t ACR;
__IO uint8_t ICR;
uint8_t RESERVED4[3];
__IO uint8_t FDR;
uint8_t RESERVED5[7];
__IO uint8_t TER;
} LPC_UART_TypeDef;
#define LPC_UART0 ((LPC_UART_TypeDef *) LPC_UART0_BASE )
UARTConfigStruct
UART_CFG_Type UARTConfigStruct;
/********************************************************************//**
* @brief UART Configuration Structure definition
**********************************************************************/
typedef struct {
uint32_t Baud_rate; /**< UART baud rate */
UART_PARITY_Type Parity; /**< Parity selection, should be:
- UART_PARITY_NONE: No parity
- UART_PARITY_ODD: Odd parity
- UART_PARITY_EVEN: Even parity
- UART_PARITY_SP_1: Forced "1" stick parity
- UART_PARITY_SP_0: Forced "0" stick parity
*/
UART_DATABIT_Type Databits; /**< Number of data bits, should be:
- UART_DATABIT_5: UART 5 bit data mode
- UART_DATABIT_6: UART 6 bit data mode
- UART_DATABIT_7: UART 7 bit data mode
- UART_DATABIT_8: UART 8 bit data mode
*/
UART_STOPBIT_Type Stopbits; /**< Number of stop bits, should be:
- UART_STOPBIT_1: UART 1 Stop Bits Select
- UART_STOPBIT_2: UART 2 Stop Bits Select
*/
} UART_CFG_Type;
IO uint8_t DLL__;
oo:
دیدگاه